BDWCM - 744508 ENAMEL ALKYD LUST QD BLUE 35109

  • MSDS: BDWCM
  • Manufacturer: PRATT AND LAMBERT WICHITA DIV
  • Product Name: 744508 ENAMEL ALKYD LUST QD BLUE 35109
  • National Stock Number: 8010-00-297-0801
Product Identification

Product ID:744508 ENAMEL ALKYD LUST QD BLUE 35109
MSDS Date:01/01/1985
FSC:8010
NIIN:00-297-0801
MSDS Number: BDWCM

Responsible Party
PRATT AND LAMBERT-WICHITA DIV
16116 E 13TH ST
WICHITA, KS 67201
US

Cage: 61196

Contractor
PRATT AND LAMBERT INC
6027 CLEVELAND, OH 44101-1027 US

Telephone: 216-566-2902

Cage: 61196

Ingredients

ISOBUTYL ALCOHOL (SARA III)

CAS: 78-83-1

RTECS: NP9625000

Fraction By Weight: 5-10%

OSHA PEL 100 PPM

ACGIH TLV: 50 PPM; 9293

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS


ALIPHATIC NAPHTHA (*SHOWN AS NAPHTHA ALIPHATIC)

Fraction By Weight: 10%

ACGIH TLV: 200 PPM


LEAD NAPHTHANATE

RTECS: OG1945000

Fraction By Weight: <5%


MINERAL SPIRITS

CAS: 64475-85-0

RTECS: PY8240000

Fraction By Weight: <5%

ACGIH TLV: 500PPM


NAPHTHA (PETROLEUM SPIRITS OR BENZIN)

CAS: 8030-30-6

RTECS: SE7555000

Fraction By Weight: 15%

OSHA PEL 100 PPM

Hazards

Effects of Overexposure:INHAL:ANESTHETIC,IRRIT OF RESPIRATORY TRACT.
SKIN OR EYE: PRIMARY IRRITATION.

First Aid

First Aid:CONTACT:FLUSH SKIN AND EYES WITH WATER. REMOVE CONTAMINATED
CLOTHING INHALATION: REMOVE TO FRESH AIR, CALL PHYSICIAN IF
SYMPTOMS PERSIST.

Fire Fighting

Flash Point:13 F TCC -10 C
Lower Limits:0.90
Extinguishing Media:NFPA CLASS B EXTINGUISHERS, CO2, DRY CHEMICAL OR
ALCOHOL FOA
Fire Fighting Procedures:SELF CONTAINED BREATHING APPARATUS
Unusual Fire/Explosion Hazard:KEEP CONTAINERS TIGHTLY CLOSED. ISOLATE
FROM HEAT. DO NOT APPLY TO VERY HOT SURFACES

Accidental Release

Spill Release Procedures:REMOVE ALL SOURCES OF IGNITION. AVOID
BREATHING VAPORS. REMOVE WITH INERT ABSORBENT AND NON-SPARKING
TOOLS.

Handling

Handling and Storage Precautions:DO NOT STORE ABOVE 120 F STORE LARGE
QUANTITIES IN BUILDINGS DESIGNED TO COMPLY WITH OSHA 1910.106
Other Precautions:GROUND CONTAINERS WHEN POURING. AVOID FREE FALL OF
LIQUID IN XS OF FEW INCNES. DON'T FLAME CUT, BRAZE OR WELD COATED
MATERIAL WO BUR MINES RESPIRATOR OR VENTILATION. ADD LABEL WARNING.

Exposure Controls

Respiratory Protection:OPEN AREAS-BUR MINES MECHANICALRESP REST
VENT-BUR MINES CHEM-MECH RE
Ventilation:GENERAL DILUTION OR LOCAL EXHAUST TO KEEP TLV BELOW LEVEL
Protective Gloves:PROLONGED USE
Eye Protection:TO PROTECT AGAINST SPLASH
Other Protective Equipment:PREVENT PROLONGED SKIN CONTACT TO
CONTAMINATED CLOTHING.
Supplemental Safety and Health

Chemical Properties

HCC:F3
Boiling Pt:B.P. Text:193-290 F
Vapor Density:1
Evaporation Rate & Reference:SLOWER THAN ETHER
Percent Volatiles by Volume:63

Stability

Stability Indicator/Materials to Avoid:YES

Disposal

Waste Disposal Methods:DISPOSE OF IN ACCORDANCE WITH LOCAL, STATE, AND
FEDERAL REGULATIONS, INCINERATE IN APPROVED FACILITY. DO NOT
INCINERATE CLOSED CONTAINERS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.